Hey Doug,
The Replacement Prop Rod Assembly for Leer Tonneau Covers # LE34MR has an overall length of 20-1/8" and with a 19-1/8" center to center measurement of the ball stud fittings. view full answer...
BAK offers their BAKBox 2 Collapsible Truck Bed Toolbox # BAK92201 which is compatible with the BAKFlip MX4 Hard Tonneau Cover # BAK48203 you found for your 2020 Ram 3500. This is really the best option since you can't use a crossover style tool box with the cover and any other box would have to mount to the bed floor which would then make your bed even shorter for loading long items such as plywood or other lumber. view full answer...
Hey Parvez, glad I could help! So the Rhino Rack Vortex Crossbars for Retrax XR tonneau covers part # RRVA180B-RRRLT600 was designed specifically to work with your RetraxOne XR tonneau cover so it is going to definitely have enough clearance above your tonneau.
This has a 220 lb dynamic weight capacity which means it can carry 220 lbs on the rack when on the road.
So your truck bed width is 59 inches and the bars of this kit are 71 inches so that would put the bars about 5 inches past... view full answer...
As long as you go with the Thule TracRac SR, which mounts to the stake pockets instead of the inner lip of the bedrails you'll be able to mount certain tonneau covers to the bed of your 2013 Ford F-150. The Thule TracRac SR comes in the following bed length sizes:
5-1/2' Bed # TH43002XT-508EX
6-1/2' Bed # TH43002XT-501EX
8' Bed # TH43002XT-000EX
From there you can choose a cover that sits inside the bed rails:
5-1/2' Bed # A22010269
6-1/2' Bed # A22010279
8' Bed # A22010289 view full answer...
I reached out to Access/Agri-Cover and for whatever reason they do not have the width of the # A61409. The only measurement they have associated with the width was the header bar which is 60.31". Since this ships directly I do not have the ability to go out and measure one in our warehouse or I would do that for you. This cover is confirmed to fit your 2019 Ford F-450 long bed with a 19" - 21" toolbox. view full answer...
Hi Timothy,
Yes, there will be some wind noise when driving your Toyota Tundra at highway speeds using the Pace Edwards JackRabbit Retractable Tonneau Cover with Contractor Rig Rack # JET5173-CR4005.
The rack is for some heavy-duty applications, with a 1,200 lb capacity with integrated ratchet straps on winches. So there's a lot going on with the rack to help carry as much as possible as safely as possible, and as a result there is going to be a bit of noise. view full answer...
Hi Eric,
That is correct, the canister size (9-1/4" tall x 9-3/4" deep) doesn't change between the 6-3/4' # PE88CV and 8' # PE82CV bed sizes. It's typically cheaper to bulk make one size even though it's a bit bigger than what the 6-3/4' cover actually needs to roll up. view full answer...